Installation guide Rack mounting support rails Smart UPS signalling RS-232 cable USB cable
Batteries & Runtime
Run Time
Efficiency
Battery graph comments
This graph is based on actual measured runtime data. All measurements were taken with new, fully charged batteries and a balanced resistive load (PF = 1.0). Actual runtimes may vary from the values of this graph. Actual runtimes are dependent on several v
Extended runtime
0
Battery recharge time
3h
Battery life
8…10 year(s)
Battery power in VAH
164 VAh runtime
Battery charger power
100 W rated
Physical
Colour
Black with silver front bezel
Height
13.1 cm
Width
43.8 cm
Depth
30.2 cm
Net weight
19.5 kg
Mounting preference
No preference
Mounting mode
Rack-mounted
USB compatible
Yes
Input
Input protection type
Circuit breaker
Input voltage limits
151…302 V adjustable 160…280 V
Network frequency
50/60 Hz +/- 3 Hz auto-sensing
Output
Crest factor
3 : 1
Graph start point
150
Harmonic distortion
Less than 5 %
Maximum configurable power in VA
1500 VA
Maximum configurable power in W
1350 W
Transfer time
6 ms typical : 10 ms maximum
UPS type
Line interactive
Wave type
Sine wave
Output frequency
50/60 Hz +/- 3 Hz sync to mains
Communications & Management
Alarm
Audible and visible alarms
Alarm
Alarm when on battery : distinctive low battery alarm : configurable delays
Emergency power off
Yes
Free slots
1
Communication port support
SmartConnect Ethernet port: for cloud monitoring feature availability varies by terms of use